Dell OptiPlex 5070 Small Form Factor Setup and Specifications - Page 11
Memory, Intel Optane Memory
View all Dell OptiPlex 5070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Memory NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. The entire memory range is available to 64-bit operating systems. Table 5. Memory Type: DDR4 DRAM Non-ECC Memory Tower Small Form Factor Micro 2666 MHz on i5 and i7 processors (performs at 2400 MHz on Celeron, Pentium and i3 processors) DIMM Slots DIMM Capacities Minimum Memory Maximum System Memory DIMMs/Channel UDIMM support Memory configurations: 4 GB = 1 x 4 GB 8 GB = 2 x 4 GB and 1 x 8 GB 16 GB = 2 x 8 G B and 1 x 16 GB 32 GB = 4 x 8 GB 32 GB = 2 x 16 GB 64 GB = 4 x 16 GB 4 Up to 64 GB 4 GB 64 GB 2 Yes Yes Yes Yes Yes Yes Yes 4 Up to 64 GB 4 GB 64 GB 2 Yes Yes Yes Yes Yes Yes Yes 2 (SoDIMM)s Up to 32 GB 4 GB 32 GB 1 No Yes Yes Yes No Yes No Intel Optane Memory NOTE: Intel Optane memory cannot replace DRAM entirely. However, these two memory technologies complement each other within the PC. Table 6. M.2 16 GB Intel Optane Tower/Small form factor/Micro Capacity (TB) 16 GB Dimensions (inches) (W x D x H) 22 x 80 x 2.38 Interface type and Maximum speed PCIe Gen2 MTBF 1.6 M hours Logical Blocks 28,181,328 Power Source: Power Consumption (reference Idle 900 mW to 1.2 W, Active 3.5 W only) Environmental Operating Conditions (Non-Condensing): Temperature Range 0°C to 70°C Relative Humidity Range 10 to 90% System specifications 11