Dell OptiPlex 7080 Small Form Factor Service Manual - Page 37
Memory modules, Removing the memory modules
View all Dell OptiPlex 7080 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1. Align the expansion card with the connector on the system board. 2. Place the card in the connector and press down firmly. Ensure that the card is firmly seated. 3. Close the expansion card latch and press it until it clicks into place. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Memory modules Removing the memory modules Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. Field service information 37
Steps
1.
Align the expansion card with the connector on the system board.
2.
Place the card in the connector and press down firmly. Ensure that the card is firmly seated.
3.
Close the expansion card latch and press it until it clicks into place.
Next steps
1.
Install the
side cover
.
2.
Follow the procedure in
after working inside your computer
.
Memory modules
Removing the memory modules
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
Field service information
37