Dell OptiPlex 7440 All-In-One Owners Manual - Page 70
Option, Description, Allow Non-Admin Password Changes
View all Dell OptiPlex 7440 All-In-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Option Description NOTE: If Strong Password is enabled, Admin and System passwords must contain at least one uppercase character, one lowercase character and be at least 8 characters long. Password Configuration Allows you to determine the minimum and maximum length of Administrator and System passwords. Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they are set. The options are: ● Disabled ● Reboot bypass Default setting: Disabled Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set. Default setting: Allow Non-Admin Password Changes is selected. TPM 1.2 Security Allows you to enable the Trusted Platform Module (TPM) during POST. This option is enabled by default. The options are: ● Clear ● PPI Bypass for Enabled Commands ● PPI Bypass for Disabled Commands ● Attestation Enable ● Key Storage Enable ● SHA - 256 NOTE: Activation, deactivation, and clear options are not affected if you load the setup program's default values. Changes to this option take effect immediately. Computrace (R) Allows you to activate or disable the optional Computrace software The options are: ● Deactivate ● Disable ● Activate NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be allowed Default setting: Deactivate Chassis Intrusion This field controls the chassis intrusion feature. The options are: ● Disabled ● Enabled Default setting: Disabled CPU XD Support Allows you to enable or disable the Execute Disable mode of the processor. Enable CPU XD Support (default) OROM Keyboard Access Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The options are: ● Enabled ● One Time Enable ● Disabled Default setting: Enable Admin Setup Lockout HDD Protection Support Allows you to enable or disable the option to enter setup when an admin password is set. ● Enable Admin Setup Lockout - This option is disabled by default. Allows you to enable or disable the HDD Protection feature. ● HDD Protection Support - This option is disabled by default. 70 System setup