Dell OptiPlex 9010 Owner's Manual (Mini-Tower) - Page 17
Installing the Optical Drive, Removing the Speaker
View all Dell OptiPlex 9010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
6. Repeat steps 4 to 5 to remove the second optical drive (if available). Installing the Optical Drive 1. Push the optical drive from the front toward the back of the computer till it is secured by the optical-drive latch. 2. Connect the data cable and power cable to the back of the optical drive. 3. Install the front panel. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing the Speaker 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Disconnect and release the speaker cable from the system board. 17
6.
Repeat steps 4 to 5 to remove the second optical drive (if available).
Installing the Optical Drive
1.
Push the optical drive from the front toward the back of the computer till it is secured by the optical-drive latch.
2.
Connect the data cable and power cable to the back of the optical drive.
3.
Install the front panel.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Speaker
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Disconnect and release the speaker cable from the system board.
17