Dell OptiPlex 990 Technical Guide - Page 24
Communications - Network Adapter Nic Cont., Communications, Integrated Lan - xp drivers
View all Dell OptiPlex 990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DELL™ OPTIPLEX™ 990 TECHNICAL GUIDEBOOK -V 1.0 COMMUNICATIONS - NETWORK ADAPTER (NIC) (CONT.) INTEGRATED INTEL® 82579 GIGABIT1 ETHERNET LAN 10/100/1000 (CONT.) Environmental Operating temperature Operating humidity Operating System Driver Support Manageability (examples WOL, PXE) Management Capabilities Alerting MT DT SFF USFF 0° C to 85° C (32° F to 185° F) 20% to 80% (non-condensing) Windows 7 32/64, Windows XP 32/64, Vista 32/64 WOL, PXE 2.1 Intel® Standard Manageability, Intel Core 2 Duo/ Quad Processor with vPro Technology 1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required. COMMUNICATIONS - INTEGRATED LAN NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards. Broadcom NetXtreme 10/100/1000 PCIe Gigabit1 Networking Card Connector Type Data Rates supported Controller Details Controller bus architecture (example PCIe 1.0a x1) Integrated memory Data transfer mode (example Bus-Master DMA) Power consumption (full operation per data rate connection speed) Power consumption (standby operation) IEEE standards compliance (example 802.1P) Hardware Certifications (example FCC, B, GS mark...) Boot ROM Support Network Transfer Mode (example Full Duplex, Half Duplex) Network Transfer Rate (example 10BASE-T (half-duplex) 10 Mbps 10BASE-T (full-duplex) 20 Mbps 100BASE-TX (half-duplex) 100 Mbps 100BASE-TX (full-duplex) 200 Mbps 1000BASE-T (full-duplex) 2000 Mbps MT DT SFF USFF RJ45 10/100/1000 Mbps Half/Full duplex PCIe c1.0a x1 64KBytes RX, 8KBytes TX Bus-Master DMA 2.84W (860mA @ +3.3V) Less than 300mW 802.3, 802.2, 802.3x, 802.1p FCC B, VCCI B, CE No 10BASE-T (full-duplex) 20 Mbps Max* 100BASE-TX (half-duplex) 100 Mbps Max* 100BASE-TX (full-duplex) 200 MbpsMax* 1000BASE-T (full-duplex) 2000 Mbps Max* * Depends on the system environment. 1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required. 24