Dell OptiPlex All-in-One 7410 Wyse ThinOS 2303 2211 2208 and 2205 Administrato - Page 230

c. Printer Identification-(Required) Enter the type or model of the printer in the exact text of the Windows printer driver name-including capitalizations and spaces. Printer mapping in a Citrix session on ThinOS uses Citrix UPD (Universal Printer Driver). You can enter any string in the Printer Identification field. d. Printer Class-Select the printer class from the drop-down list as PS. e. Enable the printer device-Select this option to enable the directly-connected printer. It enables the device to be displayed on the remote host. 3. Click OK to save your settings. Configure the LPDs settings About this task This section describes how to configure the LPD settings on your thin client. Steps 1. From the desktop menu, click System Setup > Printer. The Printer Setup dialog box is displayed. 2. Click the LPDs tab, and do the following when printing to a non-Windows network printer: Figure 54. LPD NOTE: Be sure to check with your vendor that the printer can accept Line Printer Request print requests. a. Select LPD-Select the LPD port from the drop-down list. b. Printer Name -Enter the name of the printer. If you do not specify a printer name, the LPD queue name is used automatically. c. Printer Identification-(Required) Enter the type or model of the printer in the exact text of the Windows printer driver name-including capitalizations and spaces. Printer mapping in a Citrix session on ThinOS uses Citrix UPD (Universal Printer Driver). You can enter any string in the Printer Identification field. d. LPD Hosts-(Required) The DNS or WINS name of the server for the network printer. An IP address of the printer on the network can also be entered. e. LPD Queue Name-(Required) An LPD host maintains a named queue for each supported printer. Enter the name of the queue associated with the printer to be used. 230 Configuring the thin client local settings