Dell OptiPlex XE Dell™ OptiPlex™ XE - Powered Serial Port
Dell OptiPlex XE Manual
 |
View all Dell OptiPlex XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell OptiPlex XE manual content summary:
- Dell OptiPlex XE | Dell™ OptiPlex™ XE - Powered Serial Port - Page 1
serial port on the system board. For instructions to access the jumpers on the system board, see the OptiPlex XE Service Manual available at support.dell.com/manuals. NOTE: To locate the serial port on your computer, see the Setup and Features Information Tech Sheet that shipped with your computer - Dell OptiPlex XE | Dell™ OptiPlex™ XE - Powered Serial Port - Page 2
System Board Jumper Configuration - Serial Port 1 Serial Port Voltage Jumper 1 (J1) Serial Port Voltage Jumper 2 (J2) - Dell OptiPlex XE | Dell™ OptiPlex™ XE - Powered Serial Port - Page 3
System Board Jumper Configuration - Serial Port 2 Serial Port Voltage Jumper 3 (J3) Serial Port Voltage Jumper 4 (J4) - Dell OptiPlex XE | Dell™ OptiPlex™ XE - Powered Serial Port - Page 4
Setting the Jumpers on the Expansion Card The illustration below shows the location of the jumpers and the serial port on the expansion card. 1 2 1 serial port 3 2 serial port 4 - Dell OptiPlex XE | Dell™ OptiPlex™ XE - Powered Serial Port - Page 5
Expansion Card Jumper Configuration - Serial Port 3 Serial Port Voltage Jumper 5 (J5) Serial Port Voltage Jumper 6 (J6) - Dell OptiPlex XE | Dell™ OptiPlex™ XE - Powered Serial Port - Page 6
reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Dell™ OptiPlex™ XE — Powered
Serial Port Configuration
Your Dell OptiPlex XE allows you to configure the power settings of the serial
connectors, based on the voltage requirements of the device attached to the
serial port.
To configure the power to the serial port, change the jumper settings on the
system board or the expansion card.
Setting the Jumpers on the System Board
The illustration below shows the location of the jumpers and the serial port on
the system board. For instructions to access the jumpers on the system board, see
the OptiPlex XE
Service Manual
available at
support.dell.com/manuals
.
NOTE:
To locate the serial port on your computer, see the
Setup and Features
Information Tech Sheet
that shipped with your computer.
1
serial port 1
2
serial port 2
1
2
February 2010