Dell OptiPlex XE Dell™ OptiPlex™ XE - Broadcom® T - Page 2

2 Use the DCM BIOS configuration feature to set ASF mode to DASH and ASF 2.0. 3 Use the DCM Power Control Task to restart the client computer. Low Power Mode Low Power Mode is enabled by default on your computer. The power to the network ports is disabled when the computer is turned off, or hibernate mode when LPM is enabled. NOTE: Out-of-band (OOB) management features like wake-on-LAN (WOL) will function only if the network ports are powered. NOTE: Enabling TruManage will automatically disable LPM for the TruManage network port (network port 2) only. To locate the network ports on your computer, see the Setup and Features Information tech sheet that shipped with your computer. To enable other OOB features on both the network ports, disable Low Power Mode in System Setup. TruManage Alerts TruManage will alert you through the DCM console if any of the monitored computer has hardware, environmental, or thermal failures. Environmental and Thermal Failures TruManage will notify you if the fan speed or the temperature is at abnormal levels. Fans monitored: • Processor Fan • Hard drive Fan • Power Supply Unit Fan Temperatures monitored: • Processor Temperature • System Ambient Temperature • Power Supply Unit Temperature