Dell OptiPlex XE2 Owner's Manual - Small Form Factor - Page 47
Gate A20 failure, Error Message - specifications
View all Dell OptiPlex XE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Error Message Description Decreasing available One or more memory modules may be faulty or improperly seated. Re-install the memory memory modules and, if necessary, replace them. Diskette drive 0 seek A cable may be loose or the computer configuration information may not match the hardware failure configuration. Diskette read failure The floppy disk may be defective or a cable may be loose. If the drive access light turns on, try a different disk. Diskette subsystem The floppy drive controller may be faulty. reset failed Gate A20 failure One or more memory modules may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. General failure The operating system is unable to carry out the command. This message is usually followed by specific information-for example, Printer out of paper. Take the appropriate action to resolve the problem. Hard-disk drive configuration error The hard drive failed initialization. Hard-disk drive controller failure The hard drive failed initialization. Hard-disk drive failure The hard drive failed initialization. Hard-disk drive read The hard drive failed initialization. failure Invalid configuration information-please run SETUP program The computer configuration information does not match the hardware configuration. Invalid Memory DIMM1 slot does not recognize a memory module. The module should be re-seated or configuration, please installed. populate DIMM1 Keyboard failure A cable or connector may be loose, or the keyboard or keyboard/mouse controller may be faulty. Memory address line failure at address, read value expecting value A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. Memory allocation error The software you are attempting to run is conflicting with the operating system, another program, or a utility. Memory data line failure at address, read value expecting value A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. 47