Dell P1911 User's Guide - Page 31

Back to Contents Page Setting Up the Monitor Dell™ P1911 Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar (optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached when the monitor is shipped from the factory. NOTE: This is applicable for a monitor with a stand. When the OptiPlex™ USFF 780/ OptiPlex™ SFF 980 AIO stand is bought, please refer to the respective AIO guide for set up instructions. To attach the monitor stand: 1. Place the stand on a flat surface 2. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand. 3. Lower the monitor so that the monitor mounting area snaps ontoorlocks on to the stand. Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with appropriate video systems. Connecting the white DVI cable