Dell PS-M4110 User Guide - Page 149
Chassis Management Controller CMC Secure Digital SD Card Technical Specification
View all Dell PS-M4110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Component FC Mezzanine card - Emulex LPe1105M4, FC8 Server Module BIOS Minimum Required Version BIOS 3.03a3 and firmware 2.72A2 or later • PowerEdge M600 - BIOS 2.02 or later • PowerEdge M605 - BIOS 2.03 or later • PowerEdge M805 • PowerEdge M905 • PowerEdge M610 • PowerEdge M710 • PowerEdge M710hd PowerEdgeM600/M605 LAN on motherboard (LOM) • Boot code firmware 4.4.1 or later • iSCSI boot firmware 2.7.11 or later iDRAC • Version 1.50 or later for PowerEdge xx0x systems • Version 2.10 or later for PowerEdge xx1x systems CMC Version 1.10 or later NOTE: Any system ordered after June 2008 has the correct firmware versions. To make sure proper deployment of the FlexAddress feature, update the BIOS and the firmware in the following order: 1. Update all mezzanine card firmware and BIOS. 2. Update server module BIOS. 3. Update iDRAC firmware on the server module. 4. Update all CMC firmware in the chassis; if redundant CMCs are present, ensure both are updated. 5. Insert the SD card into the passive module for a redundant CMC module system or into the single CMC module for a non-redundant system. NOTE: If CMC firmware that supports FlexAddress (version 1.10 or later) is not installed, the feature is not activated. See the Chassis Management Controller (CMC) Secure Digital (SD) Card Technical Specification document for SD card installation instructions. NOTE: The SD card contains a FlexAddress feature. Data contained on the SD card is encrypted and may not be duplicated or altered in any way as it may inhibit system function and cause the system to malfunction. NOTE: Your use of the SD card is limited to one chassis only. If you have multiple chassis, you must purchase additional SD cards. Activation of the FlexAddress feature is automatic on restart of CMC with the SD feature card installed; this activation causes the feature to bind to the current chassis. If you have the SD card installed on the redundant CMC, activation of the FlexAddress feature does not occur until the redundant CMC is made active. See the Chassis Management Controller (CMC) Secure Digital (SD) Card Technical Specification document for information on how to make a redundant CMC active. When CMC restarts, verify the activation process. For more information, see Verifying FlexAddress Activation. 149