Dell PowerApp 120 Information Update - Page 4
Corrected Orientation of Heat-Sink Clip, - systems
 |
View all Dell PowerApp 120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3. If the test is successful, remove the two DIMMs remaining in the system and install the other two DIMMs. If the test is not successful, the Dell Diagnostics identifies the defective DIMM. 4. Replace the defective DIMM and rerun the Dell Diagnostics. Corrected Orientation of Heat-Sink Clip in Figure Figure 8-8 in the Dell PowerEdge 1550 and Dell PowerApp 120 Systems Installation and Troubleshooting Guide incorrectly depicted the orientation of the heat-sink clip. In the figure below, the heat-sink clip is oriented correctly. heat-sink clip heat sink ZIF socket ZIF socket tabs (2) microprocessor ZIF socket release lever Replacing a Microprocessor and Heat-Sink 1-2 Systems Information Update
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
 |
 |
1-2
Systems Information Update
3.
If the test is successful, remove the two DIMMs remaining in the system and
install the other two DIMMs.
If the test is not successful, the Dell Diagnostics identifies the defective DIMM.
4.
Replace the defective DIMM and rerun the Dell Diagnostics.
Corrected Orientation of Heat-Sink Clip
in Figure
Figure 8-8 in the
Dell PowerEdge 1550 and Dell PowerApp 120 Systems Installation
and Troubleshooting Guide
incorrectly depicted the orientation of the heat-sink clip. In
the figure below, the heat-sink clip is oriented correctly.
Replacing a Microprocessor and Heat-Sink
heat-sink clip
heat sink
ZIF socket tabs (2)
ZIF socket
ZIF socket
release lever
microprocessor