Dell PowerConnect 3524P Getting Started Guide - Page 11
Connecting to a Terminal
View all Dell PowerConnect 3524P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connecting to a Terminal 1 Connect an RS-232 crossover cable to the ASCII terminal or the serial connector of a desktop system running terminal emulation software. 2 Connect the female DB-9 connector at the other end of the cable to the device serial port connector. NOTE: Do not connect the power cable to a grounded AC outlet at this time. You have to connect the device to a power source in the steps detailed in Starting and Configuring the Device section. Figure 1-3. Back-Panel Power Connector Console Port RPS Connector Power Connector PowerConnect 3524/3548 Rear View Console Port EPS Connector Power Connector PowerConnect 3524P/3548P Rear View Installation 9
Installation
9
Connecting to a Terminal
1
Connect an RS-232 crossover cable to the ASCII terminal or the serial connector of a desktop system
running terminal emulation software.
2
Connect the female DB-9 connector at the other end of the cable to the device serial port connector.
NOTE:
Do not connect the power cable to a grounded AC outlet at this time. You have to connect the device
to a power source in the steps detailed in Starting and Configuring the Device section.
Figure 1-3.
Back-Panel Power Connector
Console Port
RPS Connector
Power Connector
PowerConnect 3524/3548 Rear View
Console Port
EPS Connector
Power Connector
PowerConnect 3524P/3548P Rear View