Dell PowerConnect 5324 Command Line Interface Guide - Page 317

Field * ? A H N P Q U Description The probe timed out. Unknown packet type. Administratively unreachable. Usually, this output indicates that an access list is blocking traffic. Host unreachable. Network unreachable. Protocol unreachable. Source quench. Port unreachable. telnet The telnet User EXEC mode command is used to log in to a host that supports Telnet. Syntax telnet ip-address | hostname [port] [keyword1......] • ip-address-IP address of the destination host. (Range: 1 - 160 characters) • hostname-Hostname of the destination host (Range: Valid IP Address) • port-A decimal TCP port number, or one of the keywords from the ports table in the usage guidelines. The default is the Telnet port (decimal23) on the host. • keyword-Can be one or more keywords from the keywords table in the User Guidelines. Default Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines • The Telnet software supports special Telnet commands in the form of Telnet sequences that map generic terminal control functions to operating system-specific functions. To issue a special Telnet command, enter Esc and then a command character. Special Telnet Command characters System Management 317