Dell PowerConnect 7048 Getting Started Guide - Page 16
Installation, Site Preparation, Unpacking the Switch, Package Contents - user guide
View all Dell PowerConnect 7048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation Site Preparation PowerConnect 7000 Series switches can be mounted in a standard 48.26-cm (19-inch) rack or left freestanding (placed on a flat surface) and function as stand-alone switches. Before installing the switch or switches, make sure that the chosen installation location meets the following site requirements: • Power - The switch is installed near an easily accessible 100-240 VAC, 50-60 Hz outlet. • Clearance - There is adequate front and rear clearance for operator access. Allow clearance for cabling, power connections, and ventilation. • Cabling - The cabling is routed to avoid sources of electrical noise such as radio transmitters, broadcast amplifiers, power lines, and fluorescent lighting fixtures. • Ambient Temperature - The ambient switch operating temperature range is 0 to 45ºC (32 to 113ºF) at a relative humidity of up to 95 percent, non-condensing. Unpacking the Switch Package Contents When unpacking each switch, make sure that the following items are included: • One PowerConnect switch • One AC power cable (two AC power cables for the PowerConnect 7048R) • One RJ-45 to DB-9 female cable • One rack-mount kit for rack installation (two mounting brackets, bolts, and cage nuts) • One set of self-adhesive rubber pads for the free-standing switch (four pads are included) • User Documentation CD 14 Getting Started Guide