Dell PowerConnect B-RX4 Dell Instant 5.0.3.0-1.1.0.0 User Guide - Page 37
Table 6, Security, Personal., Enterprise, Open.
View all Dell PowerConnect B-RX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Figure 25 Band and Hide SSID Settings 4. Click Next and set appropriate security levels using the slider button in the Security tab. Default selection is Personal. Available options are Enterprise, Personal, and Open. Table 6 Conditions for Adding an Employee Network - Security Tab If then, You select the Enterprise security level Perform the following steps: 1. Select the required key options from the Key management dropdown list. Available options are: WPA-2 Enterprise WPA Enterprise Both (WPA-2 & WPA) Dynamic WEP with 802.1x 2. Select the required Authentication server option from the Authentication server 1drop-down list. Available options are: External - If you select this option, then an external radius server has to be configured to authenticate the users. For information on configuring an external RADIUS server, see Chapter 9, "Authentication" . Internal Server- If you select this option, then users who are required to authenticate with the internal RADIUS server must be added. Click the Users link to add the users. For information on adding a user, see "Adding a User" on page 133. Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 37