Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Troubleshooting and Di - Page 41
Link issues, Connection problems, Checking the physical connection
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Link issues 3 Link issues Symptom Symptom Symptom Port LEDs are flashing. Probable cause and recommended action Depending on the rate of the flash and the color of the port LED this could mean several things. To determine what is happening on either your port status LED or power status LED, refer to that switch's model hardware reference manual. There is a table that describes the LEDs purpose and explains the current behavior as well as provides suggested resolutions. Port LEDs are steady. Probable cause and recommended action The color of the port LED is important in this instance. To determine what is happening on either your port status LED or power status LED, refer to that switch's model hardware reference manual. There is a table that describes the LEDs purpose and explains the current behavior as well as provides suggested resolutions. No light from the port LEDs. Probable cause and recommended action If there is no light coming from the port LED, then no signal is being detected. Check your cable and SFP to determine the physical fault. Connection problems Determine if the problem is the target or the host, then continue to divide the suspected problem-path in half until you can pinpoint the problem. One of the most common solutions is zoning. Verify that the host and target are in the same zone. For more information on zoning, refer to Chapter 9, "Zoning". Checking the physical connection • Check the cables running to and from the host and storage to the switch. This path includes the patch panel. Verify that none of the cables are damaged, including indentations or bent cable. • Check the SFP on the HBAs and switches. Verify that they are known to be in good working condition. You can do this by swapping the current SFP with a known good working SFP. • Clean the optics. There are many kits on the market for cleaning fiber optics. You want to find a product that does not leave residue either from a lint-free wipe or from the solvent. Fabric OS Troubleshooting and Diagnostics Guide 25 53-1002751-01