Dell PowerConnect M6348 Configuration Guide - Page 18
Example #2: Configuring the SNTP Server, Example #3: Viewing SNTP Information
View all Dell PowerConnect M6348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Example #2: Configuring the SNTP Server console(config)#sntp server ? Enter SNTP server address or the domain name. console(config)#sntp server 192.168.10.25 ? key poll priority Authentication key to use when sending packets to this peer. Enable/Disable SNTP server polling. Configure SNTP server priority. Press enter to execute the command. console(config)#sntp server 192.168.10.25 Example #3: Viewing SNTP Information console#show sntp ? configuration status Show the configuration of the Simple Network Time Protocol (SNTP). To show the status of the Simple Network Time Protocol (SNTP). console#show sntp configuration Polling interval: 64 seconds MD5 Authentication keys: Authentication is not required for synchronization. Trusted keys: No trusted keys. Unicast clients: Enable Unicast servers: Server Key --------- ----------- 192.168.0.1 Disabled Polling ----------Enabled Priority ---------1 console#show sntp status Client Mode: Unicast Last Update Time: JUN 08 20:26:02 2009 Unicast servers: Server Status 192.168.10.25 Unknown Last response 00:00:00 Jan 1 1970 18 System Configuration