Dell PowerConnect W Clearpass 100 Software Bluesocket Integration Guide - Page 4

Test Environment The test environment referenced throughout this integration guide is based on BSC-1200 controller. Although BSC-1200 is only one of its many hardware platform, the testing and therefore this procedure is valid for all hardware variants from Bluesocket in its BlueSecure Controller platform. The following table shows the software versions used during the integration testing. This document will be updated in the future if changes in either Amigopod or Bluesocket subsequent releases affect the stability of this integration. It is advised that the customer always check for the latest integration guide available from either Amigopod or Bluesocket. Amigopod Configuration The following table reviews the IP Addressing used in the test environment but this would be replaced with the site specific details of each customer deployment: Dated Tested: Amigopod Version: Plugins Required: Bluesocket Version: Integration: July 2009 Kernel 2.0, Radius Services 2.0 Standard build only 6.4 HTTP Captive Portal Bluesocket Configuration The following table reviews the IP Addressing used in the test environment but this would be replaced with the site specific details of each customer deployment: Bluesocket IP Address Internet Gateway Address Amigopod IP Address Amigopod RADIUS port 192.168.160.118 (Protected Interface) 192.168.160.1 192.168.160.5 Auth 1812 Acc 1813 (default settings) Note: Amigopod VMA LAN interface and the Bluesocket controller's Protected Interface were placed into the same subnet. CONFIDENTIAL 4