Dell PowerConnect W Clearpass 100 Software Extreme XOS Integration Guide - Page 2
Step 1, Step 2, Step 3
View all Dell PowerConnect W Clearpass 100 Software manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
amigopod Integration Guides - Extreme XOS Step 1: Starting with the X450 in a default configuration state, create three VLANs to represent the following roles in the network design: 1. VLAN to connect corporate IT resources including the amigopod server (in example Office) 2. VLAN to connect to the Internet or DMZ segment (in example Guest) 3. VLAN to temporarily place the unauthenticated visitors piror to VLAN move (in example unsecured) create vlan "guest" configure vlan guest tag 30 create vlan "office" configure vlan office tag 10 create vlan "unsecured" configure vlan unsecured tag 20 Step 2: Now assign switch ports to the Office and Guest VLANs so the amigopod server and Internet/DMZ connection can be made: configure vlan Default delete ports all configure vlan guest add ports 17-24 untagged configure vlan office add ports 1-8 untagged Note: There is no requirement at this point to assign switch ports to the unsecured VLAN as this is done explicitly during the configuration of the Web Login feature in subsequent steps. Step 3: Assign IP Addressing details to each VLAN and ensure that IP Forwarding is enabled for only VLANs office and guest (not unsecured): configure vlan office ipaddress 10.0.20.1 255.255.255.0 enable ipforwarding vlan office configure vlan unsecured ipaddress 192.168.2.1 255.255.255.0 configure vlan guest ipaddress 192.168.1.10 255.255.255.0 enable ipforwarding vlan guest copyright © 2007 amigopod pty ltd.