Dell PowerEdge 1550 Information Update (Removing the Top Cover) - Page 1

Dell™ PowerEdge™ 1550 and PowerApp™ 120 Systems Information Update This document updates important information in your Dell PowerEdge 1550 and PowerApp 120 systems Installation and Troubleshooting Guide. Removing the Top Cover From the System Chassis To remove the top cover from the chassis or to remove the chassis from the top cover when mounted in a rack, press the safety latch lever (shown in the figure), and then slowly pull the chassis out to release the latch. Once the latch has cleared the notch in the top cover, continue to pull the chassis out slowly until the spring tabs on the outside of the chassis rails lock into the cover. If it is necessary to remove the chassis completely, press the spring tabs and pull the chassis out of the rack. CAUTION: Never attempt to install or remove the system chassis from the rack by yourself. www.dell.com support.dell.com P/N 3D460 Rev. A00 December 2000 03D460 A00