Dell PowerEdge 1900 Getting Started Guide - Page 5

System Features, A minimum of 512 MB of 533 or 667 MHz when available, Fully Buffered DIMMs FBD - fans

Get Dell PowerEdge 1900 PDF manuals and user guides View all Dell PowerEdge 1900 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

System Features The major hardware and software features of your system include: • One or two Dual-Core Intel® Xeon® Processors 5000 Sequence. • Support for symmetric multiprocessing (SMP), which is available on systems with two Intel Xeon processors. SMP greatly improves overall system performance by dividing processor operations between independent processors. To take advantage of this feature, you must use an operating system that supports multiprocessing. NOTE: If you decide to upgrade your system by installing a second processor, you must order the processor upgrade kits from Dell. Not all versions of the Intel Xeon processor will work properly as additional processors. The upgrade kit from Dell contains the correct version of the processor and heat sink. • A minimum of 512 MB of 533 or 667 MHz (when available), Fully Buffered DIMMs (FBD), upgradable to a maximum of 16 GB by installing combinations of 256-MB, 512-MB, 1-GB or 2-GB memory modules in the eight memory module sockets on the system board. • Support for up to six 3.5-inch, internal Serial-Attached SCSI (SAS) hard drives or six 3.5-inch, internal SATA hard drives. • Peripheral bay provides support for an optional optical drive and an optional half-height tape backup unit (TBU). • An optional single, 1.44-MB, 3.5-inch diskette drive. • An optional CD, DVD, or combination CD-RW/DVD drive. NOTE: DVD devices are data only. • An intrusion switch that signals the appropriate systems management software if the top cover is opened. • An 800-W power supply. • Six system cooling fans. The system board includes the following features: • Six PCI slots located in an expansion-card cage. Slots 1 and 2 are 3.3-V, 64-bit, 133-MHz PCI-X slots; slot 3 is a 3.3-V, PCIe x8 lane; slots 4 through 6 are 3.3-V, PCIe x4 lanes. Expansion-card slots 2 through 6 accommodate full-height, full-length expansion cards. Slot 1 accommodates halflength expansion cards. PCIe slots accommodate up to x8 expansion cards. Getting Started With Your System 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Getting Started With Your System
3
System Features
The major hardware and software features of your system include:
•
One or two Dual-Core Intel
®
Xeon
®
Processors 5000 Sequence.
•
Support for symmetric multiprocessing (SMP), which is available on systems with two Intel Xeon
processors. SMP greatly improves overall system performance by dividing processor operations
between independent processors. To take advantage of this feature, you must use an operating
system that supports multiprocessing.
NOTE:
If you decide to upgrade your system by installing a second processor, you must order the
processor upgrade kits from Dell. Not all versions of the Intel Xeon processor will work properly as
additional processors. The upgrade kit from Dell contains the correct version of the processor and heat
sink.
•
A minimum of 512 MB of 533 or 667 MHz (when available), Fully Buffered DIMMs (FBD),
upgradable to a maximum of 16 GB by installing combinations of 256-MB, 512-MB, 1-GB or 2-GB
memory modules in the eight memory module sockets on the system board.
•
Support for up to six 3.5-inch, internal Serial-Attached SCSI (SAS) hard drives or six 3.5-inch,
internal SATA hard drives.
•
Peripheral bay provides support for an optional optical drive and an optional half-height tape
backup unit (TBU).
•
An optional single, 1.44-MB, 3.5-inch diskette drive.
•
An optional CD, DVD, or combination CD-RW/DVD drive.
NOTE:
DVD devices are data only.
•
An intrusion switch that signals the appropriate systems management software if the top cover
is opened.
•
An 800-W power supply.
•
Six system cooling fans.
The system board includes the following features:
•
Six PCI slots located in an expansion-card cage. Slots 1 and 2 are 3.3-V, 64-bit, 133-MHz PCI-X
slots; slot 3 is a 3.3-V, PCIe x8 lane; slots 4 through 6 are 3.3-V, PCIe x4 lanes. Expansion-card slots
2 through 6 accommodate full-height, full-length expansion cards. Slot 1 accommodates half-
length expansion cards. PCIe slots accommodate up to x8 expansion cards.