Dell PowerEdge 2161DS User Manual - Page 175
Reset SIP, SIPs s, Con Versions, To reset a SIP
View all Dell PowerEdge 2161DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Figure 7-13. SIP Version Window On occasions when a tiered switch is not recognized by the Remote Console Switch, it may be necessary to reset the SIP which connects the tiered switch to the Remote Console Switch. This can be done using the Reset SIP button in the SIPs subcategory. NOTE: PS/2, USB, and USB2 SIPs are available. In addition the Remote Console Switch is compatible with all Avocent IQ modules including Sun and serial IQ modules. NOTE: The Reset SIPs button is only enabled when the SIP type is PS/2 and when a firmware upgrade is not in progress. NOTE: This procedure is only relevant where your Remote Console Switch system involves a PS/2 SIP attached to a tiered switch. On these occasions, it may be necessary to reset the SIP when the tiered switch is not recognized. NOTE: If a reset is performed, when a Remote Console Switch is connected directly to a server and not a Cascade Switch, the mouse/keyboard may fail to respond. When this occurs, the target server requires a reboot. To reset a SIP: 1 Click the Configure tab in the on-board web interface, then click the SIPs subcategory from the Versions category in the left column. 2 Click the EID of the SIP you want to reset. Managing Your Remote Console Switch Using the On-board Web Interface 158