Dell PowerEdge 2970 Rack Installation Guide - Page 18
Removing the System From the Rack, on the system back panel.
View all Dell PowerEdge 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Figure 1-7. Installing the System in the Rack 1 2 3 1 slide-release latch 4 front release latch 4 2 shoulder screws (6) 3 J slots (6) Removing the System From the Rack To remove the system from the rack, perform the following procedure: 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Remove the I/O cable connectors and power cable connectors from their respective connectors on the system back panel. 3 Loosen the thumbscrews on each side of the front chassis panel that secures the system to the rack. 16 Rack Installation Guide
16
Rack Installation Guide
Figure 1-7.
Installing the System in the Rack
Removing the System From the Rack
To remove the system from the rack, perform the following procedure:
1
Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2
Remove the I/O cable connectors and power cable connectors from their respective connectors
on the system back panel.
3
Loosen the thumbscrews on each side of the front chassis panel that secures the system to the rack.
1
slide-release latch
2
shoulder screws (6)
3
J slots (6)
4
front release latch
1
2
4
3