Dell PowerEdge 6300 Replacing Dell PowerEdge 6300 and 4300 System Power Suppli - Page 2
NOTE: The power supply will not function until the latch is engaged.
View all Dell PowerEdge 6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
handle release cable strainrelief clips (3) power supply handle (must be completely open to insert the power supply) latch power supply )LJXUH,QVHUWLQJWKH3RZHU6XSSO\ 2. Rotate the power supply handle to the closed position. As you rotate the handle, pivot levers on the handle hinge engage into slots in the chassis and push the power supply into the chassis. If the power supply does not slide into the chassis, reposition the power supply and ensure that the power supply handle is completely open before you try rotating the handle again. 3. With the power supply fully inserted into the chassis, push in on the handle until the handle latches into place. NOTE: The power supply will not function until the latch is engaged. 4. Connect the AC power cable to the power supply and route the cable through the cable strain-relief clips on the power supply handle. 5. Connect the AC power cable to the power outlet.