Dell PowerEdge C6105 User Manual - Page 6
Getting Started With Your System
View all Dell PowerEdge C6105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1 Align the end pieces of the rails on the vertical rack flanges to seat the pegs in the bottom hole of the first U and the top hole of the second U. Engage the back end of the rail until the latch locks in place. NOTE: The rails can be used in both square-hole (item 1 in figure below) and round-hole racks (item 2 in figure below). 2 Repeat step 1 to position and seat the front end piece on the vertical flange. NOTE: To remove the rails, pull on the latch release button on the end piece midpoint and unseat each rail. 3 Slide the system into the rack. 4 | Getting Started With Your System
4
|
Getting Started With Your System
1
Align the end pieces of the rails on the vertical rack flanges to seat the
pegs in the bottom hole of the first U and the top hole of the second U.
Engage the back end of the rail until the latch locks in place.
NOTE:
The rails can be used in both square-hole (item 1 in figure below)
and round-hole racks (item 2 in figure below).
2
Repeat step 1 to position and seat the front end piece on the vertical
flange.
NOTE:
To remove the rails,
pull on the latch release button on the end
piece midpoint and unseat each rail.
3
Slide the system into the rack.