Dell PowerEdge M1000e Getting Started Guide - Page 22
I/O Module Specifications, Dell PowerEdge M1000e Systems Configuration, Guide - configuration guide
View all Dell PowerEdge M1000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
I/O Module Specifications For information about the I/O modules and pass-through modules supported on your enclosure, see the Dell PowerEdge M1000e Systems Configuration Guide at support.dell.com/manuals. Environmental NOTE: For additional information about environmental measurements for specific system configurations, see dell.com/environmental_datasheets. The system is not for use in an office environment. Temperature Operating 10° to 35°C (50° to 95°F) NOTE: Decrease the maximum temperature by 1°C (1.8°F) per 300 m (985 ft) above 900 m (2955 ft). Storage -40° to 65°C (-40° to 149°F) Relative humidity Operating 8% to 85% (noncondensing) with a maximum humidity gradation of 10% per hour Storage 5% to 95% (noncondensing) Maximum vibration Operating 0.26 Grms at 10-350 Hz for 15 min Storage 1.54 Grms at 10-250 Hz for 15 min Maximum shock Operating One shock pulse in the positive z axis (one pulse on each side of the system) of 41 G for up to 2 ms Storage Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms Altitude Operating -16 to 3,048 m (-50 to 10,000 ft) Storage -16 to 10,600 m (-50 to 35,000 ft) 20 Getting Started With Your System