Dell PowerEdge M420 Information Update - Page 14
New Mezzanine Cards, New I/O Modules
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
New Mezzanine Cards Your blade now supports the following additional mezzanine cards: • Intel® Gigabit ET Quad-Port Mezzanine Card. See "Configuration Matrix for Quad-Port Mezzanine Card" on page 8 for the support matrix. • Broadcom NetXExtreme II 5709 Quad Port Ethernet Mezzanine Card for M-Series Blades. See "Configuration Matrix for Quad-Port Mezzanine Card" on page 8 for the support matrix. • Broadcom NetXtreme II 57711 Dual Port 10 Gb Ethernet Mezzanine Card with TOE and iSCSI Offload for M-Series Blades • Broadcom 57710 10 Gb Ethernet card • Emulex LPe1205-M FC8 card • ConnectX MDI QDR NOTE: CMC firmware version 1.3 is required to support FC8 mezzanine cards and I/O modules. NOTE: CMC firmware version 2.0 is required to support link tuning in mezzanine cards. For information on installing a mezzanine card, see "Installing System Components" in your Hardware Owner's Manual. For detailed information on configuring a particular card, see the card's documentation on support.dell.com. New I/O Modules Your system now supports the following additional I/O modules: • Dell PowerConnect™ M8024 10 Gb Ethernet switch module • Mellanox M2401G DDR Infiniband switch module • Brocade M5424 FC8 switch module • Mellanox M3601Q QDR Infiniband switch module NOTE: CMC firmware version 1.3 is required to support FC8 mezzanine cards and I/O modules. 14 Information Update