Dell PowerEdge M420 Dell Converged Enhanced Ethernet Command Reference - Page 109
Summary of all routes., Display connected routes only.
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
show ip route 5 show ip route Synopsis Operands Displays the current IP routing information. show ip route {| [ip-address [/mask] |longer-prefixes | static | connected | summary | all] ip-address/mask longer-prefixes static connected summary all Mask for the route to be displayed. Valid values are integers between 0 and 32. Specifies that only routes matching the ip-address and mask pair should be displayed. Display static routes only. Display connected routes only. Summary of all routes. Shows both inactive and active routes. Description Use this command to display the current IP routing information. Defaults There are no default configurations for this command. Command EXEC mode Modes User Guidelines There are no usage guidelines for this command. Example Example output of this command: switch>show ip route all Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route Gateway of last resort is 10.32.144.1 to network 0.0.0.0 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks S 10.0.0.0/8 [1/0] via 10.32.144.1 C 10.32.144.0/20 is directly connected, GigabitEthernet4/47 S* 0.0.0.0/0 [1/0] via 10.32.144.1 See Also show ip route summary Dell Converged Enhanced Ethernet Command Reference 93 53-1002115-01