Dell PowerEdge M620 Technical Guide - Page 7

Compared to the previous generation of Dell PowerEdge blade servers, the M620 has more memory, processor cores, and networking options than ever before. Features include DDR3 memory, PCI Express 3.0, a network daughter card (NDC), dual internal SD module, and Dell's next-generation iDRAC solution known as iDRAC7 Enterprise with Lifecycle Controller. The PowerEdge M620 is a replacement for the predecessor M610 and M710HD systems, three systems that are compared in Table 2. For the latest information on supported features, visit Dell.com. Feature PowerEdge M610 PowerEdge M710HD PowerEdge M620 Chassis; enclosure Half-height blade; PowerEdge M1000e Blade Enclosure Half-height blade; PowerEdge M1000e Blade Enclosure Half-height blade; PowerEdge M1000e Blade Enclosure Processors Intel Xeon processors 5500 and 5600 series Intel Xeon processors 5500 and 5600 series Intel Xeon processor E5-2600 product family Internal interconnect Memory Hard drive bays (hot plug) Intel QuickPath Interconnect Intel QuickPath Interconnect Intel QuickPath Interconnect 12 x DDR3 RDIMM and UDIMM 18 x DDR3 RDIMM and UDIMM 24 x DDR3 RDIMM, UDIMM, and LRDIMM 2 x 2.5" 2 x 2.5" 2 x 2.5" Express Flash drives Not supported Not supported Up to 2 I/O slots Optional SD port Dell OpenManage Systems Management 2 PCIe 2.0 x8 mezzanine card slots Yes Dell OpenManage Dell Management Console Lifecycle Controller 1.x iDRAC6 (Express or Enterprise) with Lifecycle Controller 1.x, Chassis Management Controller (CMC) 3.x 2 PCIe 2.0 x8 mezzanine card slots Yes Dell OpenManage Dell Management Console Lifecycle Controller 1.x iDRAC6 (Express or Enterprise) with Lifecycle Controller 1.x, Chassis Management Controller (CMC) 3.x 2 x PCIe 3.0 x8 mezzanine card slots Yes (redundant hypervisor + vFlash media) OpenManage Essentials Dell Management Console IT Assistant OMSA Agent OpenManage Power Center (requires iDRAC7 Enterprise with Lifecycle Controller) Chassis Management Controller 4.x (available with the M1000e Modular Blade Enclosure) OpenManage Integrations and Connections iDRAC7 Express for Blades with Lifecycle Controller (standard option)