Dell PowerEdge M820 Dell Converged Enhanced Ethernet Command Reference - Page 204
command to return to the default setting.This command is only for MSTP.
![]() |
View all Dell PowerEdge M820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
11 spanning-tree hello-time spanning-tree hello-time Synopsis Operands Configures the hello-time in seconds on the interface. spanning-tree hello-time seconds no spanning-tree hello-time seconds Sets the interval between the hello Bridge Protocol Data Units (BPDUs) sent by the root switch configuration messages. The range of valid values 1-10. Defaults The default is 2 seconds. Command Interface configuration mode Modes Description Use this command to set the interval time between the BPDUs sent by the root switch. Use the no spanning-tree hello-time command to return to the default setting.This command is only for MSTP. Usage Changing the hello-time affects all spanning-tree instances. The max-age setting must be greater Guidelines than the hello-time setting. Examples To set the hello time to 5 seconds: switch(conf-if-te-0/1)#spanning-tree hello-time 5 See Also forward-delay, max-age, show spanning-tree 188 Dell Converged Enhanced Ethernet Command Reference 53-1002115-01
![](/manual_guide/products/dell-8-dell-converged-enhanced-ethernet-command-reference-e333519/204.png)