Dell PowerEdge M910 Fabric OS Administrator’s Guide - Page 80

3 Ports The Brocade DCX-4S has 8 slots that contain control processor, core, port, and AP blades: • Slot numbers 4 and 5 contain CPs. • Slot numbers 3 and 6 contain core blades. • Slot numbers 1 and 2, and 7 and 8 contain port and AP blades. NOTE The Core blades for the Brocade DCX (CORE8) and the Brocade DCX-4S (CR4S-8) are not interchangeable between the two products. When you have port blades with different port counts in the same director (for example, 16-port blades and 32-port blades, or 16-port blades and 18-port blades with 16 FC ports and 2 GbE ports, or 16-port and 48-port blades), the area IDs no longer match the port numbers. Table 3 lists the port numbering schemes for the Brocade 48000, and the Brocade DCX and DCX-4S enterprise-class platforms. TABLE 3 Port blades Port numbering schemes for the Brocade 48000, Brocade DCX and DCX-4S enterprise-class platforms Numbering scheme FC2-16 FC4-16 FC8-16 FC4-32 FC8-32 FC4-48 FC8-48 FC8-64 FC10-6 FC4-16IP FA4-18 FR4-18i FS8-18 FCOE10-24 FX8-24 Ports are numbered from 0 through 15 from bottom to top. Ports are numbered from 0 through 15 from bottom to top on the left set of ports and 16 through 31 from bottom to top on the right set of ports. Ports are numbered from 0 through 23 from bottom to top on the left set of ports and 24 through 47 from bottom to top on the right set of ports. Ports are numbered from 0 through 32 from bottom to top on the left set of ports and 33 through 64 from bottom to top on the right set of ports. Ports are numbered from 0 through 5 from bottom to top. Fibre Channel ports are numbered from 0 through 7 from bottom to top. There are also 8 GbE ports (numbered ge0 - ge7, from bottom to top). Going from bottom to top, the 8 FC ports appear on the bottom, followed by the 8 GbE ports at the top. Fibre Channel ports are numbered from 0 through 15 from bottom to top. There are also 2 GbE ports (numbered A0 - A1, from top to bottom) that are for Storage Application manageability purposes; you cannot address these ports using the CLI. Ports are numbered from 0 through 15 from bottom to top. There are also 2 GbE ports (numbered ge0-ge1, from bottom to top). Going from bottom to top, the 2 GbE ports appear on the bottom of the blade followed by 16 FC ports. Ports are numbered from 0 through 15 from bottom to top. There are also 2 GbE ports (numbered ge0-ge1, from top to bottom). Going from top to bottom, the 2 GbE ports appear on the top of the blade followed by 16 FC ports. Ports are numbered 0 through 11 from bottom to top on the left set of ports and 12 through 24 from bottom to top on the right set of ports. In the first grouping, there are Fibre Channel ports numbered 0 through 5 from bottom to top on the left set of ports and 6 through 11 from bottom to top on the right set of ports. In the second grouping, there are two 10 GbE ports numbered xge0 and xge1 on the left set of ports and two GbE ports numbered ge4 and ge5 on the right side. In the third grouping, the GbE ports are numbered ge0 through ge3 on the left set of ports and ge6 through ge9 on the right set of ports. 40 Fabric OS Administrator's Guide 53-1001763-02