Dell PowerEdge MX740c EMC Boot Optimized Server Storage-S1 Users Guide - Page 11
Firmware update using iDRAC, Firmware update using Lifecycle Controller, Related documentation
View all Dell PowerEdge MX740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Firmware update using iDRAC To update the firmware using the iDRAC web interface: 1. Download the latest DUPSAS- RAID_Firmware_xxxxx_xxxx_xxx.exe from the www.dell.com/support/home. 2. Enter the iDRAC web interface and click on the Maintenance. 3. Click System Update. 4. Select the EXE Dell Update Package (DUP). 5. Upload the file, and then click Install > Reboot. 6. Log in and verify the installed firmware version in HII, iDRAC, or BOSS-S1 CLI. Firmware update using Lifecycle Controller To update the firmware using the Lifecycle Controller: 1. Download the DUP file from the www.dell.com/support/home and copy the .exe DUP file to a local drive. Example of the file name: SAS- RAID_Firmware_xxxxx_xxxx_xxx.exe. 2. Open Virtual Console and boot into Lifecycle Controller by pressing F10 at boot time. 3. Select Get the Latest firmware on the dashboard window. 4. Select Local Drive (CD/DVD/USB). Enter the name of EXE file and select Update. 5. After successful installation, reboot and verify the installed firmware version in the HII, iDRAC, or BOSS-S1 CLI. NOTE: BOSS-S1 firmware update through iDRAC/Lifecycle Controller is supported only on firmware version A01 and above. For more information see Updating BOSS-S1 controller firmware using iDRAC or LC fails on page 28. NOTE: For Information on how to update using the CLI, see BOSS-S1 CLI commands on page 24. Related documentation NOTE: • For all storage controllers and PCIe SSD documents, go to www.dell.com/storagecontrollermanuals. • For all Dell OpenManage documents, go to www.dell.com/openmanagemanuals. • For all operating system documents, go to www.dell.com/operatingsystemmanuals. • For all PowerEdge documentation, go to www.dell.com/poweredgemanuals. Overview 11