Dell PowerEdge R300 Getting Started Guide - Page 5
System Features - 1u
View all Dell PowerEdge R300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
System Features The major hardware and software features of your system include: • 1U/1S rack-mountable chassis with support for static rails and sliding rails. NOTE: Use the System Setup program to view processor information. See "Using the System Setup Program" in your Hardware Owner's Manual. • One of the following processors: - Single Core Intel® Celeron® 445 Processor - Dual-Core Intel Core™2 Duo E6305 or E6405 Processor - Quad-Core Intel Xeon® X3323, X3353, or X3363 Processor • A minimum of 512-MB single or dual-ranked registered 667-MHz DDR2 memory modules with ECC, upgradeable to a maximum of 24-GB by installing combinations of 512-MB, 1-GB, 2-GB, or 4-GB memory modules in six memory module sockets on the system board. • One of the following riser card options: - Two riser cards (left and center risers), each providing a x8 lane width PCI-Express expansion slot. OR - One riser card (center riser), providing a x8 lane width PCI-Express expansion slot. - One riser card (left riser) providing a 3.3 V, 64-bit 133MHz PCI-X expansion slot. • One 12.7 mm DVD, or combination CD-RW/DVD in a device drive bay. • Support for the following internal hard-drive configurations: - Up to two 3.5-inch, internal, SATA hard drives with the optional SAS controller card (hot-plug option available). - Up to two 3.5-inch, internal, Serial-Attached SCSI (SAS) hard drives with an optional SAS controller card (hot-plug option available). Getting Started With Your System 3