Dell PowerEdge R520 User Manual - Page 4
Removing a Processor Blank - manual
View all Dell PowerEdge R520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Removing a Processor Blank CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Before upgrading your system, download the latest system BIOS version from support.dell.com and follow the instructions included in the compressed download file to install the update on your system. NOTE: You can update the system BIOS using the Dell Lifecycle Controller. 2 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. When disconnected from AC power, press and hold the power button for 10 seconds to fully drain the system of stored power prior to removing the cover. NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the system. 3 Open the system. See "Opening the System" in the Owner's Manual. 4 Remove the cooling shroud. See "Removing the Cooling Shroud" in the Owner's Manual. CAUTION: The processor blank is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly if not firmly grasped. 5 Position your thumb firmly over the processor-blank socket-release lever and release the lever from the locked position by pushing down and out from under the tab. Rotate the lever upward. 6 Rotate the processor shield upward and out of the way. 7 Lift the processor blank out of the socket and leave the release lever up so that the socket is ready for the new processor. See Figure 1-1. 4 Additonal Processor Installation