Dell PowerEdge R760xd2 Host Bus Adapter Users Guide HBA 355 and 350 Series - Page 25
Install the Dell HBA355i Front
![]() |
View all Dell PowerEdge R760xd2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
For systems configured with HBA355i Front in an upside-down orientation, reattach the HBA355i Front to the backplane before reinstalling the backplane into the system. 8. Install the system cover. 9. Reconnect the system to its electrical outlet, and turn the system on, including any attached peripherals. Figure 9. Remove HBA355i Front Install the Dell HBA355i Front Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. Steps 1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2. Remove the system cover. 3. Connect the SAS data cable connectors to the card. NOTE: Ensure that you connect the cable according to the connector labels on the cable. The cable does not function properly if reversed. 4. Align the card-edge connector with the connector on the system board. Installation and removal of cards 25
![](/manual_guide/products/dell-poweredge-r760xa-host-bus-adapter-users-guide-hba-355-350-series-b23a450/25.png)