Dell PowerEdge R910 Information Update - Intel Xeon 5600 Series Processors - Page 1
Dell PowerEdge R910 Manual
View all Dell PowerEdge R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Intel Xeon 5600 Series Processors- Information Update Important Information • Your system requires a BIOS and iDRAC firmware upgrade to support Intel Xeon 5600 series processor (less than 130 W). You can download the BIOS and iDRAC firmware for the Intel Xeon 5600 series processor at support.dell.com. NOTE: A BIOS and iDRAC firmware update only supports a limited feature set of the Intel Xeon 5600 series processor. • The following new Dell PowerEdge systems marked with the Roman Numeral II on the chassis support the complete feature set of Intel Xeon 5600 series processors: - R410 - R510 - R610 - R710 - T410 - T610 - T710 - M610 - M710 NOTE: The PowerEdge R410, T410, and R510 systems do not support 130 W Intel Xeon 5600 series processors. NOTE: The modular systems, PowerEdge M610 and M710, support the 130 W Intel Xeon X5680 only in the 130 W processor category. NOTE: The PowerEdge R610 and M710 systems need specific heat sinks to support the 130 W Intel Xeon 5600 series processors. • Mixing of Intel Xeon 5500 and 5600 series processors is not supported. • Systems with the Intel Xeon 5600 series processors support memory sparing. December 2010