Dell PowerEdge R910 Information Update - Page 6
Dell PERC H800 Storage Adapter Slot Limitation, With PERC H700i as the Internal Storage, Controller - manual
View all Dell PowerEdge R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Dell PERC H800 Storage Adapter Slot Limitation (With PERC H700i as the Internal Storage Controller) The system supports up to two PERC H800 adapters. There is no slot limitation when only one H800 adapter is installed. However, when you install two H800 adapters in a system with a PERC H700i internal storage adapter, one of the H800 adapters must be installed in slot 7 (x16 Gen 2 slot). If you run embedded system diagnostics without an H800 adapter installed in slot 7, a software error occurs. Under the same condition, if you enable Collect System Inventory on Restart (CSIOR), you may not be able to boot to the operating system. You can enable/disable CSIOR through the iDRAC Configuration Utility by pressing during boot up. For more information, see the iDRAC User's Guide at support.dell.com/manuals. Dell Lifecycle Controller System Services Limitations Table 1. Lifecycle Controller System Services Issues Cause Solution SAS6/iR or PERC H200 has virtual disks Make the virtual disks active before in an inactive or non-optimal state. booting to Lifecycle Controller. PERC H200 or 6 Gbps SAS HBA are configured with two virtual disks. This is a known issue. Do not create multiple virtual disks using either PERC H200 or 6 Gbps SAS HBA. 6 Information Update