Dell PowerEdge Rack Enclosure 2410 User Manual - Page 19
Remove the Allen bolt that secures the hinge body to the rack, and, place the bolt in a safe location.
View all Dell PowerEdge Rack Enclosure 2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
g Locate the top bolt hole in the right side of the rack, and fasten the hinge body to the right side of the rack with the Allen bolt. h Insert the spring between the top and bottom hinge-pin holes in the hinge body. i Slide the hinge pin into the hinge body. j Insert the retention clip through the hinge so that the retention clip is below the spring. 4 Reverse the bottom hinge body. a Remove the Allen bolt that secures the hinge body to the rack, and place the bolt in a safe location. b Rotate the hinge body 180 degrees so that the hinge posts are now on the right side of the hinge body (see Figure 1-6). c Locate the bottom bolt hole in the right side of the rack, and use the Allen bolt to fasten the hinge body to the right side of the rack. 5 Rotate the front door 180 degrees so that its hinge-pin housings are on the right side (see Figure 1-7). Dell™ PowerEdge™ 4210 Installation Guide 17