Dell PowerEdge SC1430 Information Update - Page 1

Dell™ PowerEdge™ SC 1430 Systems Information Update Installing a Fourth Hard Drive A fourth hard drive requires an optional hard-drive carrier with a cooling fan. Installation steps are described in "Installing an Optional Fourth Hard Drive" in your Hardware Owner's Manual. When performing this procedure, note the following additional information: NOTE: If a second processor is installed in your system, do not route the fan cable through the narrow space between the air baffle and the processor heat sink. Open the processor access door on the air baffle and push the fan cable underneath the heat sink fins to prevent damage to the cable. System Messages Table 1 provides an additional system message that your system may display on the screen. See "System Messages" in your Hardware Owner's Manual for information about other system messages. Table 1. System Messages Message The FBD link to the following DIMM failed to train: DIMM x Causes Faulty or improperly installed memory module. Corrective Actions Ensure that only Dell-qualified memory is used. Dell recommends purchasing memory upgrade kits directly from www.dell.com or your Dell sales agent to ensure compatibility. Reseat memory modules. See "Memory" in your Hardware Owner's Manual. If the problem persists, see "Troubleshooting System Memory" in your Hardware Owner's Manual. October 2006