Dell PowerEdge T110 Information Update - Page 1

Information Update eSATA Device and Software RAID Solutions Booting from an eSATA device is not supported when the system is set to RAID mode and software RAID PERC S100 is enabled. eSATA does not support hot-swap in ATA mode. The following table lists the eSATA device options under different SATA controller modes: Mode Bootable Hot-Swappable ATA Yes No AHCI Yes Yes RAID (S100 enabled) No No Software RAID PERC S100/S300 is not supported on the following Windows®-based operating systems. Operating System Microsoft® Hyper-V™ Server 2008 (x64) Microsoft Windows Server® 2008 (x64) with Hyper-V role enabled Edition Standard Windows Server 2008 with SP2 (x64) with Hyper-V role enabled Standard Windows Server 2008 R2 (x64) with Hyper-V role enabled Standard NOTE: Software RAID PERC S100/S300 is not supported on all Linux®-based systems. September 2009