Dell PowerEdge T350 EMC Technical Specifications - Page 8
NIC port specifications, Serial connector specifications, IDSDM (optional)
![]() |
View all Dell PowerEdge T350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Table 9. PowerEdge T350 USB specifications (continued) Front Rear USB port type No. of ports USB port type No. of ports 2.0-compliant port) Internal (Optional) USB port type No. of ports NOTE: The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port. NIC port specifications The PowerEdge T350 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on the LAN on Motherboard (LOM). Table 10. NIC port specification for the system Feature LOM card Specifications 1 GbE x 2 VGA ports specifications The PowerEdge T350 system supports One DB-15 VGA port on the back panel. Serial connector specifications The PowerEdge T350 system supports one serial connector, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. IDSDM (optional) The PowerEdge T350 system supports Internal Dual SD module (IDSDM). The IDSDM supports two SD cards and is available in the following configurations: Table 11. Supported SD card storage capacity IDSDM card ● 16 GB ● 32 GB ● 64 GB NOTE: One IDSDM card slot is dedicated for redundancy. NOTE: Use Dell EMC branded SD cards that are associated with the IDSDM configured systems. Video specifications The PowerEdge T350 system supports Matrox G200 graphics controller with 16 MB of video frame buffer. Table 12. Supported video resolution options Resolution Refresh rate 640 x 480 60, 72 Color depth (bits) 8, 16, 24 8 Technical specifications
![](/manual_guide/products/dell-poweredge-t350-emc-technical-specifications-0e0c526/8.png)