Dell PowerEdge T410 Information Update - Intel Xeon 5600 Series Processors - Page 4

New POST Messages The following are the new POST messages for the Intel Xeon 5600 series processors. Message Description System Memory Size: Displays the amount of system memory, system X.X GB, System Memory memory speed, and current system memory Speed: XXX MHz, operating voltage. Voltage: 1.5V or 1.35V This CPU power rating is not supported This message displays when either of the following occurs: • The Intel Xeon 5600 130 W series processor is detected on an old system board (systems not marked with roman numeral II). For a list of the supported systems, see "Important Information". • The Intel Xeon X5677 130 W series quad-core processor is detected on PowerEdge M610 and M710. Non-ECC DIMM detected Displays when the system detects a non-ECC on DIMM XX memory module. Enabling Dell BIOS Intelligent Turbo Mode The Dell BIOS Intelligent Turbo Mode feature allows the operating system to set the processor performance in the turbo mode. Based on the processor utilization, this feature delays the processor turbo mode initiation for better power management. When the turbo mode is enabled in the Processor Settings screen of the system setup, the feature can be enabled or disabled using the following BIOS setup options: NOTE: The Dell BIOS Intelligent Turbo Mode is disabled when the turbo mode is disabled in the processor system setup screen. Setup Screen Power Management Power Management Power Management Field CPU Power and Performance Management CPU Power and Performance Management CPU Power and Performance Management Field value OS DBPM System DBPM Maximum Performance Intelligent Turbo Enabled Disabled Disabled