Dell PowerEdge T550 Integrated Remote Access Controller 9 Attribute Registry - Page 121

BIOS.HttpDev4TlsConfig.HttpDev4TlsConfig (Read or Write) Description This field controls the authentication configuration for this HTTP device. Legal Values None Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.HttpDev4TlsConfig.HttpDev4TlsMode (Read or Write) Description This field is to set the authetication mode for this HTTP device. bios.networkSettings.HttpDev4EnDis Legal Values ● "None", "OneWay" Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices This group contains the attributes that provides details about BIOS.IntegratedDevices. BIOS.IntegratedDevices.CurrentEmbVideoState (Read or Write) Description Read-only. Indicates the current state of the Embedded Video Controller. If the Embedded Video Controller is the only display capability in the system (that is, no add-in graphics card is installed), then the Embedded Video Controller is automatically used as the primary display even if the Embedded Video Controller setting is Disabled. Legal Values ● Enabled ● Disabled Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.IntegratedDevices.EmbNic1 (Read or Write) Description Legal Values Enables or disables the embedded NIC. NOTE: If set to Disabled (OS), the embedded NIC may still be available for shared network access by the embedded management controller. This function must be configured via the NIC management utilities provided with your system. There is only one onboard RJ45 port shared between BIOS and iDRAC. So it can only be enabled when iDRAC NIC selection is set to Shared. If the iDRAC setting is Dedicated, it will be grayed out and forced to Disabled. ● Enabled BIOS Attributes 121