Dell PowerSwitch S4820T Command Line Reference Guide for the S4820T System 9.9 - Page 1318

Version 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.2.1.0 7.6.1.0 7.5.1.0 6.1.1.1 Description Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Policy name character limit increased from 16 to 32. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Related Commands An aggregate output QoS policy applies to all outbound port traffic. An aggregate output QoS policy can coexist with per-queue output QoS policies. If the rate shape exists in both aggregate and per-queue qospolicy, minimum of 2 take effect. Some of all Queue-rate will not exceed aggregate. policy-map-input - creates an input policy map. policy-map-output - creates an output policy map. policy-map-input Create an input policy map. S4820T Syntax policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos] To remove an input policy map, use the no policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos] command. Parameters policy-map-name cpu-qos layer2 cpu-qos Enter the name of the policy map in character format (32 characters maximum). Enter the cpu-qos keyword to assign this ACL to control plane traffic only. (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The default is Layer 3. (OPTIONAL) Enter the keyword cpu-qos to create an input policy to be used to rate-limit control-plane traffic (CoPP). Defaults Command Modes Command History Layer 3 CONFIGURATION This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide. 1318 Quality of Service (QoS)