Dell PowerVault 201S Dell PowerVault 200S and 210S Storage Systems Rack I - Page 22
the rack. Ensure that the rail is level from front to back.
 |
View all Dell PowerVault 201S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
rail-mounting flange vertical rail 3U conical metal washers (4 per rail) 10-32 x 1/2-inch flat-head screws (4 per rail) 4. Slide the adjustable rail-mounting flange out until it meets the back vertical rail of the rack. Ensure that the rail is level from front to back. 5. Thread two 10-32 x 1/2-inch flat-head screws with a conical metal washer and push them through the back vertical rail of the rack and into the two holes of the adjustable rail-mounting flange (see Figure 1-8). Tighten the two screws. 1-8 Dell PowerVault 200S and 210S Storage Systems Rack Installation Guide
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
26
 |
 |
1-8
Dell PowerVault 200S and 210S Storage Systems Rack Installation Guide
±²³´µ¶·¸¹(º··#ÀÀ¼½È²Ã³·Àȶ·)´ÇǵÀ·»¼²&·#ÄĶÏË&*·À·Àȶ·±µÂÃÀ·+¶µÀ²½¼&·
»¼²&·
4.
Slide the adjustable rail-mounting flange out until it meets the back vertical rail of
the rack. Ensure that the rail is level from front to back.
5.
Thread two 10-32 x 1/2-inch flat-head screws with a conical metal washer and
push them through the back vertical rail of the rack and into the two holes of the
adjustable rail-mounting flange (see Figure 1-8). Tighten the two screws.
rail-mounting flange
vertical rail
conical metal washers
(4 per rail)
10-32 x 1/2-inch flat-head
screws (4 per rail)
3U