Dell PowerVault 35F Dell PowerVault 35F User's Guide - Page 35
Enter, Fibre Channel-to-SCSI Mapping Configuration, Changing the Fibre Channel-to-SCSI Mapping Mode
View all Dell PowerVault 35F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide Press the Enter key to toggle between SCSI Bus 0 and SCSI Bus 1. When mapping SCSI Target ID's for SCSI host to Fibre Channel Target capability, the user must first enable the target ID before proceeding to modify the mapping table for that device. Fibre Channel-to-SCSI Mapping Configuration This option allows selecting the addressing mode of the PowerVault 35F, as well as displaying attached devices. The menu to modify the Indexed addressing table is also accessed through this menu. When configuring Indexed addressing, the user is presented a table with the current mappings. The user can then select a table entry by FCP LUN and specify the associated BUS:TARGET:LUN . Alternately, the user can fill with one of multiple preset patterns, or with the list of currently attached SCSI devices. The user then saves these values in FLASH memory, where they are retained across future device resets or power cycles. Changing the Fibre Channel-to-SCSI Mapping Mode This option allows the user to select the appropriate Fibre Channel-to-SCSI mapping mode on the PowerVault 35F. The options are SCC addressing, Indexed addressing, and Auto addressing. file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]