Dell PowerVault 56F Dell PowerVault 56F Switches Rack Installation Guide - Page 24
Dell PowerVault 56F Systems Rack Installation Guide, bezel, switch, manifold, thumbscrews 2
View all Dell PowerVault 56F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
The section that follows include instructions for installing the PowerVault 56F switch in the rack. To install the PowerVault 56F switch into the rack, do the following: 1. Lift the switch and align its slide rails to fit inside the slide assemblies on the rack (see Figure 8). 2. Slide the switch into the rack until both latch assemblies snap into place. 3. Lift the manifold (the component that attaches to the front of the switch and align its rails to fit inside the slide assemblies on the rack (see Figure 9). switch manifold thumbscrews (2) bezel 4. Slide the manifold into the rack. 5. Tighten the thumbscrews on the front of the manifold. 6. Connect the cabling and power cords to the back of the switch. 10 Dell PowerVault 56F Systems Rack Installation Guide