Dell PowerVault 735N Updating PERC 2/DC and Other PCI Card Drivers on NAS - Page 3
Updating the Dell™ PERC 2/DC and Other PCI Card Drivers in PowerVault™ 735N NAS Appliances
View all Dell PowerVault 735N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Updating the Dell™ PERC 2/DC and Other PCI Card Drivers in PowerVault™ 735N NAS Appliances This document describes how to update a Dell PowerEdge™ expandable RAID controller 2/dual channel (PERC 2/DC) redundant array of independent disks (RAID) or another peripheral component interconnect (PCI) card's driver from your Dell PowerVault network attached storage (NAS) appliance. Some drivers allow updating from the Microsoft ® Windows® operating system on a remote management station. This document also announces the availability of a new driver for the PERC 2/DC RAID adapter installed in a PowerVault 735N system. The new driver allows you to install and configure your PERC 2/DC RAID controller remotely through the PowerVault NAS Manager instead of going through the RAID controller's basic input/ output system (BIOS) and connecting a keyboard, mouse, and monitor for local operation at the PowerVault 735N system. Another feature of the new driver is the ability to expand the capacity of RAID devices without the need to reboot the system. All users of PERC 2/DC controllers are urged to download and install the latest driver, using the procedure in this document. NOTE: To obtain the latest drivers, visit http:// support.dell.com. Driver Update Procedure The sample procedure in this section installs the updated drivers for the PERC 2/DC RAID adapter in a PowerVault 735N system. Before performing this update, see your System's Administrator's Guide. To install the drivers for the PERC 2/DC RAID controller or other option cards on the PowerVault 735N system, perform the following steps. support.dell.com Updating Drivers on a PowerVault NAS Appliance 1