Dell PowerVault 745N Dell PowerVault NAS Systems — Installing the - Page 11

F2=Setup, Boot Sequence, Hard drive C, Hard-Disk Drive Sequence, Hard-disk-emulated USB flash drive - bios

Page 11 highlights

6. During the boot process, press when "F2=Setup" displays on the screen (at the "Dell" splash screen just before POST starts). 7. In the BIOS setup screen, select Boot Sequence and press . 8. Ensure that Hard drive C is first in the list and press to exit the Boot Sequence menu. 9. Select Hard-Disk Drive Sequence and press . 10. Ensure that Hard-disk-emulated USB flash drive is first in the list by using the \ keys and press . The system screen should look similar to this: 11. Press again, select Save Changes and Exit, and press . The system automatically shuts down and reboots from the USB Key. 12. When the Dell PowerVault NAS 745N menu displays, press to select Reinstall NAS system, and press . The system screen should look similar to this: Initial Release: 2 January 2007 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

6. During the boot process, press <F2> when “
F2=Setup
” displays on the
screen (at the “Dell” splash screen just before POST starts).
7. In the BIOS setup screen, select
Boot Sequence
and press <Enter>.
8. Ensure that
Hard drive C
is first in the list and press <Esc> to exit the
Boot Sequence
menu.
9. Select
Hard-Disk Drive Sequence
and press <Enter>.
10. Ensure that
Hard-disk-emulated USB flash drive
is first in the list by
using the <+>\<-> keys and press <Esc>.
The system screen should look similar to this:
11. Press <Esc> again, select
Save Changes and Exit
, and press <Enter>.
The system automatically shuts down and reboots from the USB Key.
12. When the Dell PowerVault NAS 745N menu displays, press <1> to select
Reinstall NAS system
, and press <Enter>.
The system screen should look similar to this:
Initial Release: 2 January 2007
11